purchase of industrial grinding dust collector Electric control box cover, can not be opened at will during work, such as need to adjust the cleaning time, or need to check the circuit, should be shut off after the power to work. purchase of industrial grinding dust collector integrated the advantages of different kinds of pulse-jet dust collectors, overcomes the disadvantages of insufficient cleaning strength and uneven distribution of inlet and outlet air, and expands the application range. The structure of the purchase of industrial grinding dust collector has its own characteristics, so it improves the dust collection rate, adaptability, and prolongs the service life of the filter bag. After several years of production practice, the equipment has stable operation, small maintenance and large combination range.

When running the purchase of industrial grinding dust collector, you should observe the status of the differential pressure system to check for faults. Record the pressure difference value of the pressure difference system of the purchase of industrial grinding dust collector accurately. If the pressure difference is suddenly found during the recording process, the filter bag should be checked to see whether there is blockage or dust compaction. At the same time, the ash cleaning system should be accurately checked to avoid excessive ash accumulation in the ash hopper. If there is a sharp drop during the recording process, it may be that the filter bag is damaged or is falling off.

Below, analyze the selection of the purchase of industrial grinding dust collector to consider the dust severity:

The dust severity has great influence on the dust removal performance of the dust collector. This influence is evident in gravity, inertial force and centrifugal force dust collectors. A common feature of all dust collectors is that the smaller the accumulation weight, the more difficult the separation and capture of dust particles, and the more serious the secondary flying of dust, so special measures should be taken in operation and equipment structure. According to experience, for dust with a ratio of dust particle weight to dust particle accumulation weight of more than 10, special attention should be paid to the secondary flying phenomenon of dust. If the carbon black dust is greater than 46, so its secondary flying is serious, and its dust separation and capture is also very difficult.

Method to determine the cleaning speed of the purchase of industrial grinding dust collector:

purchase of industrial grinding dust collector equipment The equipment that separates the dust from the flue gas is called the dust collector or dust removal equipment. The performance of the dust collector is expressed by the amount of gas that can be processed, the resistance loss of gas passing through the dust collector and the dust removal rate.

Two, purchase of industrial grinding dust collector in use to prevent the gas in the bag room cooling to below the dew point, In particular, the purchase of industrial grinding dust collector equipment under negative pressure should be paid attention to.

purchase of industrial grinding dust collector With the extension of filtration time, the dust layer on the filter bag continues to accumulate, the resistance of the dust removal equipment continues to rise, when the resistance of the equipment rises to the set value, the cleaning device begins to clean the ash.

Fourth, because its shell often has air leakage, so that the bag room gas temperature is lower than the dew point, the filter bag will be damp, resulting in dust is not loose, but sticky attached to the filter bag, the fabric hole blocked, resulting in ash failure, so that the dust collector pressure drop is too large, can not continue to operate, some can not dust paste bag.

Five, purchase of industrial grinding dust collector A branch lifting valve is closed, the filter air is cut off, and then the electromagnetic pulse valve is opened, the compressed air expands in the upper box in a short time, and flows into the filter bag, so that the filter bag expands and degenerates vibration. Under the action of reverse airflow, the dust attached to the outer surface of the filter bag is stripped and falls into the ash hopper.

purchase of industrial grinding dust collector https://www.kaisenfilter.com/KSZHDM-01-Combined-Grinding-Dust-Collector.html